The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. Wood is treated as a material in direct comparison with other products. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. The utilization of technology gives wood an upper hand in most of this comparison. Some of these advantages include wood being a versatile material that can be used in a wide range of products. It is also based on renewable resources. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. The biggest threat to wood being moisture and insects has to be kept away from the wood. The rotting and decay of the timber products are caused by the moisture and the insects. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. This is a copper-based preservative that is applied to the wood for protection. There are a few disadvantages of this method as a mode of wood preservation. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.
Another wood treating method that is fast being accepted is the use of copper metal. The use of this method is fast being accepted because it is not corroding the metal fasteners. This process is what in other words called the micronized copper wood preservative. A high-pressure liquid that has the copper metal mixed in it is driven into the wood. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. The characteristics of the wood are highly improved and the when this process is used to treat wood. The timber treated in this way is used in both outdoor and indoor frames that last very long.
Termites cannot eat through timber treated through this method. It has also shown to be an improvement in corrosion resistant properties to metal fasteners. When you use this method to treat wood, then you will not need to worry for at least ten years.